Setting Up My Integrated Ingenico

Certain aspects of setup and configuration will require you to input characters using the keypad.

Each number key also represents a set of letters that can be entered with that key, if pressed more than once. The first key press will enter the number, while pressing the key multiple times will enter one of the letters associated with that number key.

For example:

• Press 2 once to enter the number 2.
• Press 2 twice to enter a lowercase a.
• Press 2 three times to enter a lowercase b.
• Press 2 four times to enter a lowercase c.
• Press 2 five times to enter a capital A.
• Press 2 six times to enter a capital B.
• Press 2 seven times to enter a capital C.

The Admin Menu provides you access to the Settings, Configuration, Change Menu Password, and Restart Terminal options.

Accessing the Menu

To access the Admin Menu, do the following:

1. Press F and enter the default password of CCMerchant using the multi-tap method.
2. Press O (green button) to confirm the password and access the Admin Menu.

Navigating the Menu

• Press the down arrow to scroll down.
• Press the up arrow to scroll up.
• Press O (green button) to select.
• Press < (yellow button) to clear.
• Press X (red button) to cancel or return to the main menu.

Setting a static IP address for your device is optional. Typically, the device is assigned an IP address automatically when connecting to a network. To manually set the network settings for the device, follow the steps below.

1. Access the Admin Menu.
2. Press F to scroll down and press O (green button) to select Configuration.
3. Press F to scroll down and press O (green button) to select IP Settings.
4. Press F to scroll down and press O (green button) to select Configure IP.
5. Press F to scroll down and press O (green button) to select Static IP.
6. Enter the static IP Address using the number pad and press O (green button).
7. Enter the Network Mask using the number pad and press O (green button).
8. Enter the Gateway Address using the number pad and press O (green button).
9. Enter the DNS Address 1 using the number pad and press O (green button).
10. Enter the DNS Address 2 using the number pad and press O (green button).
11. The terminal displays Updating IP configuration and restarting terminal, then restarts to connect using the new static configuration.